permits.llc
Generators

Do You Need a Permit for a Generator in New Hampshire?

A standby generator in New Hampshire needs a town electrical permit and inspection, and a propane or gas unit usually needs a second permit for the fuel.

By the permits.llc team · Last reviewed November 12, 2026

Yes. A standby generator that is wired into your house is electrical work under New Hampshire's State Building Code, so in any town that issues permits you need an electrical permit and an inspection, and a propane or natural gas unit usually needs a second permit for the fuel line.

A portable generator running a refrigerator on an extension cord is a different thing. The permit question starts the moment a generator connects to the house wiring.

What does New Hampshire law require for a generator?

The State Building Code under RSA 155-A applies in every New Hampshire town and includes the National Electrical Code, currently the 2023 edition. The same chapter leaves permits, fees and inspections to the city or town. So the code is the same in Concord and in Seabrook, but the paperwork belongs to the local building department.

Under the electrical code, a generator connected to a home's wiring needs transfer equipment: a transfer switch or interlock that keeps the generator from sending power back out onto the utility lines while crews are working on them. That is why the hookup, not the generator itself, is what makes this a permit job.

Licensing follows the trades. Electricians are licensed under RSA 319-C, and gas fitters under RSA 153, both through the Office of Professional Licensure and Certification.

What does a town ask for?

Concord has written the clearest answer. Its generator application guide (Bulletin 2025-01, August 2025) asks owners and installers to upload, with the electrical permit application, a diagram showing:

  • the house and the relevant property lines;
  • where the generator sits, and its distance to the house, windows and doors, and ignition sources (the guide points to the State Fire Marshal's bulletin on residential stationary generators for those distances);
  • the route and depth of any electrical trench;
  • existing and new panels, transfer switches, the utility meter and the service disconnect;
  • the sign at the service equipment that tells firefighters a generator is on site.

Concord then inspects twice: the electrical trench before it is backfilled, and the finished installation. A generator on fuel gas also needs a mechanical permit, and a diesel unit sends you to Concord Fire for its permits.

Other towns run their own forms. Hampton says plainly that electrical work needs a permit. Start with your town's page in our New Hampshire building department directory, and if your town has no building inspector, read what happens where nobody inspects.

How does a generator show up in town permit records?

Often as more than one permit. In the 12 months from November 2025 through October 2026, 129 permits in the four New Hampshire towns we hold records for mention a generator in their description:

TownElectricalBuildingMechanical / gasOtherTotal
Concord30320154
Hampton20160238
Seabrook1540019
Exeter1800018
Total8323203129

Electrical is the common thread in all four towns. Hampton also logs a good share of generators as building permits, and Concord's mechanical permits are the gas side its guide asks for.

The fuel can be a separate record again. Concord files LP tank installations as their own permit type, 75 of them in the same 12 months, and those descriptions rarely say "generator" even when one is on the way. Counts here cover only permits that use the word, so the real number of generator jobs is somewhat higher. Town totals only; we do not publish individual addresses.

What should you ask your installer?

Before you sign, five questions save trouble later:

  1. Who pulls the electrical permit, and who pulls the gas or mechanical permit? Ask for both permit numbers before work starts.
  2. Is the electrician licensed in New Hampshire, and is the gas fitter? Concord checks licenses at inspection.
  3. What transfer equipment are you using, and will the generator run the whole house or selected circuits?
  4. Where will the unit sit relative to windows, doors and vents, and does that placement meet the State Fire Marshal's guidance your town relies on?
  5. If you are adding a propane tank, who handles the tank permit?

If the generator comes with a new boiler or heat pump, our New Hampshire HVAC permit guide covers the mechanical side. For doing any of the wiring yourself, see the homeowner electrical exemption in New Hampshire, and check with your town first: Concord's guide says only licensed electricians install generators there.

Frequently asked questions

Do you need a permit for a standby generator in New Hampshire?
Yes, in towns that issue permits. A standby generator wired into the house is an electrical installation under the State Building Code, RSA 155-A, which adopts the National Electrical Code statewide, and the town issues the permit and inspects. Concord, for example, asks for an electrical permit with a site diagram and inspects the trench and the finished job.
Do I need a second permit if the generator runs on propane or natural gas?
Usually. In Concord, a generator that runs on fuel gas also needs a mechanical permit, and only a New Hampshire licensed gas fitter may do the gas work. A new propane tank can be its own permit as well: Concord files LP tank installations as a separate permit type.
Do I need a permit for a portable generator?
Running appliances off a portable generator with cords is not a building project. Connecting any generator to the house wiring is, because it needs transfer equipment so the generator cannot feed power back into the utility lines. That hookup is electrical work, so ask your building department about the permit.
Can I install a standby generator myself in New Hampshire?
Plan on hiring licensed trades. RSA 319-C:15 lets a homeowner do electrical work in a single-family home they own and live in, but towns set their own rules for who installs a generator: Concord's generator guide says only New Hampshire licensed electricians may perform the electrical installation and that licenses are checked at inspection.
Who pulls the generator permit, me or the contractor?
Normally the licensed electrician applies for the electrical permit and the gas fitter for the gas permit, and each calls for their own inspections. As the owner, ask for the permit numbers before the work starts and keep the final inspection sign-off with your house records.

Planning a project?

Your town's page has the building office, how it takes permits, and a short form to get matched with licensed New Hampshire contractors.