Do You Need a Permit to Remove a Wall in Massachusetts?
Yes. Massachusetts requires a permit to cut away any wall or partition, load-bearing or not. Who pulls it, when plans need a stamp, and what we see filed.
By the permits.llc team · Last reviewed November 9, 2026 · Leer en español · Ler em português
Yes. Massachusetts requires a building permit to take out a load-bearing wall: the state residential code lists "the removal or cutting of any structural beam or load-bearing support" as work that is not an ordinary repair (780 CMR 51.00, R105.2.2). The same sentence also names "the substantial cutting away of any wall, partition or portion thereof," so most non-bearing walls need one too.
That second part is the one people miss. The rule is not about whether the wall holds up the house. It is about cutting walls away at all.
What exactly does the code say?
Section R105.2.2 starts generously: no application is needed "for ordinary repairs to structures." Then it lists what a repair is not. A permit is required for work "including but not limited to" cutting away walls or partitions, removing or cutting a structural beam or load-bearing support, removing or changing a required means of egress, and rearranging parts of a building in a way that affects egress or mechanical systems (780 CMR 51.00).
The state's own contractor chart reads the same way. It marks "Carpentry, structural" and "Sheetrock/Wallboard" as needing a building permit, and says wiring or plumbing work needs a building permit when it means "cutting/notching building elements" (Mass.gov: HIC Contractor Resources).
So the honest answer for a non-bearing partition is "probably." A closet wall coming out of a bedroom is a judgment call for your building official, not for you or your contractor. Ask first; it is a short phone call.
When do the plans need an engineer's stamp?
When your town asks for one, and for a beam it often will. The code lets the building official require construction documents "prepared by a registered design professional" where special conditions exist, and lets the official waive drawings when the work is simple enough not to need them (780 CMR 51.00, R107.1).
Two Norfolk County towns show how that plays out:
- Braintree asks for a floor plan when the interior is altered and a "framing plan if walls are to be removed." If steel, trusses or engineered lumber are used, "the plan must be stamped by an engineer or architect" (Braintree: Time Saving Information for Applicants).
- Westwood says most plans do not need an architect, but if the work uses LVLs, steel beams or I-joists, the building department "may require that the plans be stamped by a Registered Architect or Engineer" (Westwood: Residential Construction FAQs).
Replacing a bearing wall almost always means a new beam, and the beam is usually an LVL or steel. In practice, then, plan on sizing calculations or a stamped drawing for a load-bearing wall, and check your town's own checklist on its building department page.
Who pulls the permit?
Either you or your contractor, depending on who does the work. On an owner-occupied one- or two-family home, a homeowner may take out the building permit without a construction supervisor licence, but a homeowner who hires people "shall act as supervisor," as Westwood's page quotes the state code (Westwood FAQs).
If a contractor does the job, let them pull it. The state's consumer page says a Construction Supervisor License "is generally required for any work that involves a building's structural elements," tells homeowners to make sure "the registered contractor agrees to pull the building permit," and warns that if you apply yourself, you "may not be eligible for compensation from the Guaranty Fund" (Mass.gov: HIC Homeowner Resources). The guide to who can pull which permit covers the rest.
Wires and pipes in the wall are separate. Only a licensed master or journeyman electrician "can be legally hired to perform electrical work at your home" (Mass.gov: Electricians consumer fact sheet), so moving an outlet or a switch leg out of the wall is the electrician's own permit.
What do Massachusetts wall removal permits look like?
Mostly kitchens. We read the permit descriptions in our records from January 2025 through October 2026 and kept the ones that say which kind of wall was coming out, leaving out exploratory demolition and shop or office fit-outs. Statewide totals:
| Load-bearing wall named | Non-load-bearing wall named | |
|---|---|---|
| Permits | 186 | 187 |
| Towns | 34 | 32 |
| Description mentions a kitchen | 124 (67%) | 79 (42%) |
| Names a beam, LVL, header, girder or steel | 120 (65%) | 16 (9%) |
| Mentions an engineer, stamp or calculations | 31 (17%) | 2 (1%) |
| Median job value (where stated) | $40,725 (104 permits) | $11,790 (112 permits) |
Two things stand out. Non-bearing walls are filed about as often as bearing ones, which is what R105.2.2 predicts. And a load-bearing wall is usually part of a bigger kitchen job, with a beam named right in the description.
These are only permits whose descriptions say which wall it is, so the real totals are higher. For the statewide trend, see the Massachusetts building permits report for August 2026 and the Norfolk County page.
What should you ask before the wall comes down?
- Is this wall bearing? Get the answer in writing from whoever designs the opening, not from a guess in the attic.
- Who is pulling the building permit, and what is the beam spec? The permit should name the beam or point to stamped plans.
- Who handles the wiring and any plumbing in the wall? Those are licensed trades with their own permits.
- When is the framing inspection? The beam and posts need to be seen before drywall covers them.
If the wall is coming out for an open kitchen, masshomecomfort's kitchen and bath contractors in Massachusetts page lists remodelers by town.
Frequently asked questions
Do you need a permit to remove a load-bearing wall in Massachusetts?
Do you need a permit to remove a non-load-bearing wall in Massachusetts?
Do I need an engineer to remove a load-bearing wall?
Can a homeowner pull the permit to remove a wall?
Planning a project?
Mass Home Comfort lists licensed Massachusetts contractors by trade and town, and your building department page has the office, the portal and the phone number.