permits.llc

Essex County, Massachusetts

Danvers, MA Building Department and Permits

Inspectional Services (Building)

Hours
Mon-Wed 8:00-4:00; Thu 8:00-7:00; Fri 8:00-12:00
Inspector of Buildings
Tim Hudon, Building Commissioner

Verified 2026-09-16 against the official Danvers website.

Do I need a permit in Danvers, and who pulls it?

In Massachusetts, most permits are pulled by the licensed contractor doing the work, not the homeowner. For one- and two-family homes the state building code requires a licensed construction supervisor or a registered design professional to oversee construction, and for existing owner-occupied one- to four-family homes the contractor must also be registered with the Home Improvement Contractor program.

The homeowner exception is narrow. The building code lets an owner-occupant of a one- or two-family home apply for a building permit for work on their own home, but it applies to building permits only: electrical work may only be done by a master or journeyman electrician licensed by the state, and plumbing and gas work only by a licensed plumber or gas fitter, each under a permit issued to that licensee. It also has a cost the state warns about directly: a homeowner who pulls the building permit themselves may not be eligible for the Guaranty Fund if the contractor's work goes wrong.

Need a licensed contractor? See HVAC, roofing and other contractors serving Danvers on Mass Home Comfort.

Sources: When is a Construction Supervisor License required?; Massachusetts State Building Code, 780 CMR; HIC Homeowner Resources; Electricians consumer fact sheet; Plumbers and gas fitters consumer fact sheet.

Heating and cooling in DanversReplacing a furnace, boiler, water heater or central air conditioner, or installing a heat pump or ductless mini split, is licensed work in Massachusetts. Anything on the gas side, a gas furnace, boiler, water heater or range connection, is gas fitting, and the state issues gas-fitting permits only to a licensed plumber or gas fitter.Read more

The electrical side of a heat pump, mini split or AC condenser needs an electrical permit pulled by a licensed electrician. Your Danvers building department may also require a mechanical permit for the equipment itself; the contractor pulls that too.

Heating and cooling installers are one of the trades mass.gov specifically exempts from Home Improvement Contractor registration, so do not expect an HIC number from an HVAC company. What you should expect is a gas-fitter or plumber licence for gas equipment and an electrician's licence for the wiring, with a permit on file for each.

If you are counting on a Mass Save rebate for a heat pump, the equipment must be installed by a contractor participating in the Mass Save Heat Pump Installer Network. A permit trail is part of how that work is documented, so an unlicensed, unpermitted install can cost you the rebate as well as the inspection.

Sources: Plumbers and gas fitters consumer fact sheet; Electricians consumer fact sheet; HIC Homeowner Resources; Air source heat pump rebates.

Full Massachusetts guide
Windows and doors in DanversReplacing windows or exterior doors is not on the list of work the Massachusetts building code exempts from a permit, so plan on one. The code's own exemption for "ordinary repairs" does not cover anything that removes or changes a required means of egress, which is exactly what a bedroom window is, and changing the size of an opening is an alteration to the structure.Read more

Whether a strict like-for-like swap in the same opening counts as an ordinary repair is a call the Danvers building department makes, so ask before assuming.

In an existing owner-occupied one- to four-family home, the contractor who replaces your windows or doors must be registered as a Home Improvement Contractor, and the state's guidance is that the registered contractor pulls the building permit. A written contract is required by law for any home improvement job over $1,000, and the contractor may not collect more than one-third of the price up front.

If Danvers has a local historic district, exterior window and door changes there usually need the historic district commission's approval before the building permit issues. That is a town rule, not the state code, so check with the building department.

Sources: Massachusetts State Building Code, 780 CMR; HIC Homeowner Resources; When is a Construction Supervisor License required?.

Full Massachusetts guide
Roofing in DanversRe-roofing and roof replacement are not among the projects the Massachusetts building code exempts from a permit, so in Danvers treat a roof job as permitted work. Because the work touches the building's structure and weather envelope, it is overseen by a licensed construction supervisor, and on an existing owner-occupied one- to four-family home the roofing contractor must also hold Home Improvement Contractor registration.Read more

The state's guidance is that the registered contractor applies for the permit, not you.

The building code has specific requirements for roof coverings, underlayment and ice protection that the inspector checks against, and they depend on the roof type and the edition of the code in force. Rather than quote them here, ask the Danvers building department what it inspects for on a re-roof; the contractor pulling the permit is expected to know.

Sources: Massachusetts State Building Code, 780 CMR; When is a Construction Supervisor License required?; HIC Homeowner Resources.

Full Massachusetts guide
Siding in DanversResiding a house is not on the list of work the Massachusetts building code exempts from a permit, so in Danvers plan on a building permit for siding replacement. The code's "ordinary repairs" exemption is meant for patching what is there, not stripping and recladding the envelope, and the Danvers building department decides where that line falls; the contractor pulling the permit is expected to ask.Read more

On an existing owner-occupied one- to four-family home the siding contractor must be registered as a Home Improvement Contractor, and the state's guidance is that the registered contractor applies for the permit rather than the homeowner. A written contract is required by law for any home improvement job over $1,000, with no more than one-third of the price collected up front.

If Danvers has a local historic district, a change of siding material or profile on a building inside it usually needs the historic district commission's approval before the building permit issues. That is a town rule, not the state code, so check with the building department.

Sources: Massachusetts State Building Code, 780 CMR; HIC Homeowner Resources; When is a Construction Supervisor License required?.

Full Massachusetts guide

Recent building permits in Danvers

2,249 permits on file across 19 months. Records through July 30, 2026.

Last 90 days: 28 building, 13 plumbing, 1 sheet metal.

Permits commonly pulled in Danvers over the last twelve months: 1,049 building, 206 plumbing, 28 demolition, 23 sheet metal and 5 gas permits.

Most recent building permits filed in Danvers, Massachusetts
FiledStreetType
Jul 30, 2026WATER STBuilding
Jul 30, 2026PINE STPlumbing
Jul 30, 2026MAPLE STSheet Metal
Jul 30, 2026CENTRE STBuilding
Jul 30, 2026MAPLE STBuilding
Jul 29, 2026HOLTEN STPlumbing
Jul 29, 2026PINE STBuilding
Jul 29, 2026WASHINGTON STBuilding
Jul 28, 2026NewburyBuilding
Jul 28, 2026WATER STBuilding
Jul 27, 2026JACOBS LANDINGBuilding
Jul 27, 2026SPRING STBuilding
Jul 27, 2026ANDOVER STBuilding
Jul 27, 2026HIGH STBuilding
Jul 27, 2026ADAMS STPlumbing
Jul 26, 2026STAFFORD RDBuilding
Jul 25, 2026CHESTNUT STPlumbing
Jul 24, 2026DAYTON STPlumbing
Jul 24, 2026SUMMER STBuilding
Jul 24, 2026Independence WayBuilding
Jul 24, 2026COLLINS STBuilding
Jul 24, 2026ENDICOTT STBuilding
Jul 24, 2026MACARTHUR BLVDBuilding
Jul 24, 2026ANDOVER STBuilding
Jul 23, 2026CHERRY HILL DRPlumbing
Jul 23, 2026CONGRESS AVEBuilding
Jul 22, 2026MEADOW LANEPlumbing
Jul 22, 2026NEWBURY STBuilding
Jul 22, 2026ENDICOTT STBuilding
Jul 22, 2026FOWLER STBuilding
Jul 21, 2026NICHOLS STBuilding
Jul 21, 2026ELLIOTT STPlumbing
Jul 21, 2026FLORENCE STPlumbing
Jul 21, 2026FLORENCE STPlumbing
Jul 21, 2026HARDY STPlumbing
Jul 21, 2026HARDY STPlumbing
Jul 20, 2026CHERRY HILL DRBuilding
Jul 20, 2026HIGH STBuilding
Jul 20, 2026ENDICOTT STBuilding
Jul 20, 2026JERSEY LANEPlumbing
Jul 19, 2026CABOT RDBuilding
Jul 19, 2026CABOT RDBuilding
Jul 17, 2026PICKERING STBuilding
Jul 17, 2026NAUMKEAG ROWBuilding
Jul 17, 2026MAPLE STBuilding
Jul 17, 2026ENDICOTT STBuilding
Jul 17, 2026CONGRESS AVEBuilding
Jul 17, 2026BEAVER PARK RDBuilding
Jul 17, 2026FOSTER STBuilding
Jul 16, 2026INDEPENDENCE WAYBuilding

Get quotes from local contractors for a project in Danvers.

Permits by type in Danvers

Monthly archive

Before you plan work in Danvers

Danvers' Inspectional Services, in the Inspectional Services office at Town Hall, 1 Sylvan Street, enforces the state building code, the Architectural Access Board regulations and the town's general and zoning bylaws, reviewing plans, issuing permits and inspecting the construction, reconstruction, alteration, repair and demolition of buildings, the installation of equipment and the use and occupancy of buildings and land. Applications are submitted through the town's ViewPoint Cloud portal, where issued permits and the property folders are also public. The office is open Monday to Wednesday 8 to 4, Thursday 8 to 7 and Friday 8 to noon; the inspectors keep counter hours 8 to 9 a.m. and 1 to 2 p.m. Monday to Thursday, with an extra 5 to 6 p.m. window on Thursday, and 8 to 9 on Friday. Tim Hudon is the Building Commissioner, Steven Latulippe the Building Inspector, Mark Fialkowski the Electrical Inspector and Kevin M. Daly the Plumbing and Gas Inspector, each on an extension of the main number. The building division also carries out the periodic inspections required by 780 CMR 110.7 and Table 110 — theatres, libraries and lecture halls, schools, religious buildings, restaurants, day-care facilities, hotels, public pools and multi-family buildings of three or more units, where an owner or agent must be present and the inspector checks fire escapes, common areas, porches, egress doors, stairs and handrails, smoke and CO detectors and fire alarms, emergency lights and exit signs.

Sources: Town of Danvers — Inspectional Services; Town of Danvers — Building.

Towns near Danvers

Frequently asked questions

Do I need a permit to replace my furnace, boiler or AC in Danvers?

Yes. A gas furnace, boiler or water heater is gas-fitting work, and Massachusetts issues gas permits only to a licensed plumber or gas fitter. Central AC and heat pumps need an electrical permit pulled by a licensed electrician, and Danvers may require a mechanical permit for the equipment. The licensed contractor pulls these permits.

Read the full Massachusetts guide
Do I need a permit to install a heat pump or mini split in Massachusetts?

Yes. The state's guidance is that a ductless mini split is regulated equipment and needs a building permit, and the wiring needs an electrical permit from a licensed electrician. A ducted system adds a sheet metal permit for the ductwork. If you want the Mass Save rebate, the system must also be installed by a contractor in the Mass Save Heat Pump Installer Network.

Read the full Massachusetts guide
Do I need a permit to replace windows in Massachusetts?

Plan on it. Window and door replacement is not on the building code's list of permit-exempt work, and anything that changes a bedroom egress window or the size of an opening is never exempt. Whether a same-size swap counts as an ordinary repair is the local building department's call. On an owner-occupied one- to four-family home the contractor must be a registered Home Improvement Contractor and should pull the permit.

Read the full Massachusetts guide
Do I need a permit to replace siding in Massachusetts?

Plan on it. Residing a house is not among the projects the Massachusetts building code exempts from a permit, and the "ordinary repairs" exemption covers patching, not recladding. On an owner-occupied one- to four-family home the contractor must be a registered Home Improvement Contractor and should pull the permit; the local building department settles borderline cases.

Read the full Massachusetts guide
Do I need a permit to replace my roof in Danvers?

Yes. Re-roofing is not exempt under the Massachusetts building code, so Danvers will expect a building permit, pulled by a licensed construction supervisor. On an owner-occupied one- to four-family home the roofer must also hold Home Improvement Contractor registration.

Read the full Massachusetts guide
How long is a building permit good for in Massachusetts?

Under 780 CMR 105.5, a permit becomes invalid if the work has not started within 180 days of issue, or if the work is suspended or abandoned for 180 days once begun; the building official can extend it in writing for up to 180 days at a time on a written request made before it expires. An application that is filed but not pursued is treated as abandoned after 180 days, with extensions of up to 90 days at a time.

Read the full Massachusetts guide
Are building permits public record, and how do I look one up for an address in Danvers?

Yes, permits are public records. Danvers uses OpenGov, linked at the top of this page, where you can search by address. The recent filings table on this page shows the same public data with the street, date and permit type.

Read the full Massachusetts guide
Can a homeowner pull their own permit?

Sometimes, and it is usually a mistake. The state building code lets the owner-occupant of a one- or two-family home apply for a building permit for their own home, but never for electrical, plumbing or gas work, which only the licensee may do under their own permit. Mass.gov also warns that a homeowner who pulls the building permit may lose eligibility for the Guaranty Fund if a registered contractor's work goes wrong. Let the contractor pull it.

Read the full Massachusetts guide
What happens if work is done without a permit?

The town can order the work stopped, opened up for inspection, corrected, or removed, and unpermitted work surfaces at sale when a buyer's attorney searches the permit history. For electrical work the state's own advice is to hire a licensed electrician to review it, pull a permit for it, and bring it up to code. It is far cheaper to permit it the first time.

Explore Massachusetts

Are you a contractor?

Homeowners in Danvers ask this page for licensed heating, window, roofing and siding contractors. Get listed on masshomecomfort.com and receive those requests.

Get listed on masshomecomfort.com

Permit data for your business

Every Danvers permit above, with the contractor name, valuation, house number and work description, delivered daily by permit type and niche.

See permit alert plans