permits.llc

Norfolk County, Massachusetts

Canton, MA Building Department and Permits

  • The Canton Building Department is at Canton Town Hall, 801 Washington St (lower level), Canton, MA.
  • Canton Building Department phone: 781-821-5003.
  • Canton Building Department hours: Mon, Wed, Thu 7:00-3:30; Tue 7:00-5:00; Fri 7:00-1:00.
  • Building permits in Canton are filed through OpenGov, the online permit portal.
  • Canton is in Norfolk County, Massachusetts.
  • Last verified 2026-09-16 against the Canton website.

Building Department

Hours
Mon, Wed, Thu 7:00-3:30; Tue 7:00-5:00; Fri 7:00-1:00
Inspector of Buildings
Edward Walsh, Building Commissioner

Verified 2026-09-16 against the official Canton website.

Do I need a permit in Canton, and who pulls it?

In Massachusetts, most permits are pulled by the licensed contractor doing the work, not the homeowner. For one- and two-family homes the state building code requires a licensed construction supervisor or a registered design professional to oversee construction, and for existing owner-occupied one- to four-family homes the contractor must also be registered with the Home Improvement Contractor program.

The homeowner exception is narrow. The building code lets an owner-occupant of a one- or two-family home apply for a building permit for work on their own home, but it applies to building permits only: electrical work may only be done by a master or journeyman electrician licensed by the state, and plumbing and gas work only by a licensed plumber or gas fitter, each under a permit issued to that licensee. It also has a cost the state warns about directly: a homeowner who pulls the building permit themselves may not be eligible for the Guaranty Fund if the contractor's work goes wrong.

Need a licensed contractor? See HVAC, roofing and other contractors serving Canton on Mass Home Comfort.

Sources: When is a Construction Supervisor License required?; Massachusetts State Building Code, 780 CMR; HIC Homeowner Resources; Electricians consumer fact sheet; Plumbers and gas fitters consumer fact sheet.

Heating and cooling in CantonReplacing a furnace, boiler, water heater or central air conditioner, or installing a heat pump or ductless mini split, is licensed work in Massachusetts. Anything on the gas side, a gas furnace, boiler, water heater or range connection, is gas fitting, and the state issues gas-fitting permits only to a licensed plumber or gas fitter.Read more

The electrical side of a heat pump, mini split or AC condenser needs an electrical permit pulled by a licensed electrician. Your Canton building department may also require a mechanical permit for the equipment itself; the contractor pulls that too.

Heating and cooling installers are one of the trades mass.gov specifically exempts from Home Improvement Contractor registration, so do not expect an HIC number from an HVAC company. What you should expect is a gas-fitter or plumber licence for gas equipment and an electrician's licence for the wiring, with a permit on file for each.

If you are counting on a Mass Save rebate for a heat pump, the equipment must be installed by a contractor participating in the Mass Save Heat Pump Installer Network. A permit trail is part of how that work is documented, so an unlicensed, unpermitted install can cost you the rebate as well as the inspection.

Sources: Plumbers and gas fitters consumer fact sheet; Electricians consumer fact sheet; HIC Homeowner Resources; Air source heat pump rebates.

Full Massachusetts guide
Windows and doors in CantonReplacing windows or exterior doors is not on the list of work the Massachusetts building code exempts from a permit, so plan on one. The code's own exemption for "ordinary repairs" does not cover anything that removes or changes a required means of egress, which is exactly what a bedroom window is, and changing the size of an opening is an alteration to the structure.Read more

Whether a strict like-for-like swap in the same opening counts as an ordinary repair is a call the Canton building department makes, so ask before assuming.

In an existing owner-occupied one- to four-family home, the contractor who replaces your windows or doors must be registered as a Home Improvement Contractor, and the state's guidance is that the registered contractor pulls the building permit. A written contract is required by law for any home improvement job over $1,000, and the contractor may not collect more than one-third of the price up front.

If Canton has a local historic district, exterior window and door changes there usually need the historic district commission's approval before the building permit issues. That is a town rule, not the state code, so check with the building department.

Sources: Massachusetts State Building Code, 780 CMR; HIC Homeowner Resources; When is a Construction Supervisor License required?.

Full Massachusetts guide
Roofing in CantonRe-roofing and roof replacement are not among the projects the Massachusetts building code exempts from a permit, so in Canton treat a roof job as permitted work. Because the work touches the building's structure and weather envelope, it is overseen by a licensed construction supervisor, and on an existing owner-occupied one- to four-family home the roofing contractor must also hold Home Improvement Contractor registration.Read more

The state's guidance is that the registered contractor applies for the permit, not you.

The building code has specific requirements for roof coverings, underlayment and ice protection that the inspector checks against, and they depend on the roof type and the edition of the code in force. Rather than quote them here, ask the Canton building department what it inspects for on a re-roof; the contractor pulling the permit is expected to know.

Sources: Massachusetts State Building Code, 780 CMR; When is a Construction Supervisor License required?; HIC Homeowner Resources.

Full Massachusetts guide
Siding in CantonResiding a house is not on the list of work the Massachusetts building code exempts from a permit, so in Canton plan on a building permit for siding replacement. The code's "ordinary repairs" exemption is meant for patching what is there, not stripping and recladding the envelope, and the Canton building department decides where that line falls; the contractor pulling the permit is expected to ask.Read more

On an existing owner-occupied one- to four-family home the siding contractor must be registered as a Home Improvement Contractor, and the state's guidance is that the registered contractor applies for the permit rather than the homeowner. A written contract is required by law for any home improvement job over $1,000, with no more than one-third of the price collected up front.

If Canton has a local historic district, a change of siding material or profile on a building inside it usually needs the historic district commission's approval before the building permit issues. That is a town rule, not the state code, so check with the building department.

Sources: Massachusetts State Building Code, 780 CMR; HIC Homeowner Resources; When is a Construction Supervisor License required?.

Full Massachusetts guide

Recent building permits in Canton

84 permits on file across 18 months. Records through June 16, 2026.

Permits commonly pulled in Canton over the last twelve months: 27 building and 12 plumbing permits.

Most recent building permits filed in Canton, Massachusetts
FiledStreetType
Jun 16, 2026WASHINGTON STBuilding
Jun 15, 2026EVELYN WAYPlumbing
Jun 11, 2026INDIAN LNBuilding
Jun 10, 2026BRIDLE PATHBuilding
Jun 8, 2026PECUNIT STPlumbing
Jun 1, 2026WASHINGTON STBuilding
May 28, 2026BOLIVAR STPlumbing
May 18, 2026CROSS STBuilding
May 14, 2026WASHINGTON STBuilding
May 7, 2026BOLIVAR STPlumbing
May 7, 2026WASHINGTON STPlumbing
May 1, 2026NEPONSET STBuilding
Apr 30, 2026PLEASANT STBuilding
Apr 28, 2026CROSS STBuilding
Apr 27, 2026ROCKLAND STBuilding
Apr 14, 2026CantonBuilding
Apr 7, 2026EVERENDON RDBuilding
Apr 1, 2026GREENLODGE STBuilding
Mar 31, 2026BIRCHCROFT RDPlumbing
Mar 25, 2026PONKAPOAG TRAILBuilding
Mar 12, 2026ROCKLAND STPlumbing
Mar 2, 2026PLEASANT STBuilding
Mar 2, 2026WASHINGTON STBuilding
Feb 17, 2026NEW BOSTON DRBuilding
Feb 16, 2026CHARLES DRPlumbing
Jan 23, 2026LINCOLN STBuilding
Jan 15, 2026CantonBuilding
Jan 15, 2026GREENBRIAR RDBuilding
Jan 9, 2026BLUE HILL RIVER RDBuilding
Jan 5, 2026NEPONSET STPlumbing
Jan 3, 2026Windsor Woods LnBuilding
Dec 29, 2025HARTWELL PLBuilding
Dec 21, 2025SHERMAN STPlumbing
Dec 19, 2025SHERMAN STPlumbing
Dec 2, 2025PLEASANT STBuilding
Nov 11, 2025MAPLECROFT RDBuilding
Nov 2, 2025LAKE RDBuilding
Oct 23, 2025PLEASANT STBuilding
Oct 23, 2025PLEASANT STPlumbing
Sep 22, 2025WASHINGTON STBuilding
Sep 10, 2025SUMNER STBuilding
Aug 29, 2025NEPONSET STPlumbing
Aug 25, 2025RANDOLPH STBuilding
Jul 31, 2025COPPERSMITH WAYBuilding
Jul 31, 2025COPPERSMITH WAYPlumbing
Jul 31, 2025COPPERSMITH WAYPlumbing
Jul 23, 2025PLEASANT GARDEN RDBuilding
Jul 21, 2025JANICE RDBuilding
Jul 8, 2025WASHINGTON STBuilding
Jun 17, 2025WASHINGTON STBuilding

Get quotes from local contractors for a project in Canton.

Permits by type in Canton

Monthly archive

Before you plan work in Canton

Canton's Building Department, on the lower level of Memorial Hall at 801 Washington Street, is a public safety office that enforces the applicable codes, laws and regulations so that buildings are built and maintained safely. Its office staff answer general zoning questions, explain permits, the permitting process and the department's policies, walk applicants through the Zoning Board of Appeals process, and take the inspection requests for every inspector in the office. Permits are filed through the town's ViewPoint Cloud online permitting. The department posts step-by-step building permit procedures for additions and alterations, commercial work and new residential construction, a procedure for demolishing or moving a structure with the Historical Commission's demolition delay information, applications to amend a permit and for certificates of inspection, the residential and commercial building, electrical, gas, plumbing and sheet metal applications, a homeowner licence exemption, a home occupation application, the stove installation code, swimming pool requirements, the zoning fee schedule and the 2022 zoning bylaws, along with public safety advisories on roof collapse, carbon monoxide and the fire code's outside cooking rule. The office is open Monday, Wednesday and Thursday 7 to 3:30, Tuesday 7 to 5 and Friday 7 to 1. Edward Walsh is the Building Commissioner.

Sources: Town of Canton — Building Department.

Towns near Canton

Frequently asked questions

Do I need a permit to replace my furnace, boiler or AC in Canton?

Yes. A gas furnace, boiler or water heater is gas-fitting work, and Massachusetts issues gas permits only to a licensed plumber or gas fitter. Central AC and heat pumps need an electrical permit pulled by a licensed electrician, and Canton may require a mechanical permit for the equipment. The licensed contractor pulls these permits.

Read the full Massachusetts guide
Do I need a permit to install a heat pump or mini split in Massachusetts?

Yes. The state's guidance is that a ductless mini split is regulated equipment and needs a building permit, and the wiring needs an electrical permit from a licensed electrician. A ducted system adds a sheet metal permit for the ductwork. If you want the Mass Save rebate, the system must also be installed by a contractor in the Mass Save Heat Pump Installer Network.

Read the full Massachusetts guide
Do I need a permit to replace windows in Massachusetts?

Plan on it. Window and door replacement is not on the building code's list of permit-exempt work, and anything that changes a bedroom egress window or the size of an opening is never exempt. Whether a same-size swap counts as an ordinary repair is the local building department's call. On an owner-occupied one- to four-family home the contractor must be a registered Home Improvement Contractor and should pull the permit.

Read the full Massachusetts guide
Do I need a permit to replace siding in Massachusetts?

Plan on it. Residing a house is not among the projects the Massachusetts building code exempts from a permit, and the "ordinary repairs" exemption covers patching, not recladding. On an owner-occupied one- to four-family home the contractor must be a registered Home Improvement Contractor and should pull the permit; the local building department settles borderline cases.

Read the full Massachusetts guide
Do I need a permit to replace my roof in Canton?

Yes. Re-roofing is not exempt under the Massachusetts building code, so Canton will expect a building permit, pulled by a licensed construction supervisor. On an owner-occupied one- to four-family home the roofer must also hold Home Improvement Contractor registration.

Read the full Massachusetts guide
How long is a building permit good for in Massachusetts?

Under 780 CMR 105.5, a permit becomes invalid if the work has not started within 180 days of issue, or if the work is suspended or abandoned for 180 days once begun; the building official can extend it in writing for up to 180 days at a time on a written request made before it expires. An application that is filed but not pursued is treated as abandoned after 180 days, with extensions of up to 90 days at a time.

Read the full Massachusetts guide
Are building permits public record, and how do I look one up for an address in Canton?

Yes, permits are public records. Canton uses OpenGov, linked at the top of this page, where you can search by address. The recent filings table on this page shows the same public data with the street, date and permit type.

Read the full Massachusetts guide
Can a homeowner pull their own permit?

Sometimes, and it is usually a mistake. The state building code lets the owner-occupant of a one- or two-family home apply for a building permit for their own home, but never for electrical, plumbing or gas work, which only the licensee may do under their own permit. Mass.gov also warns that a homeowner who pulls the building permit may lose eligibility for the Guaranty Fund if a registered contractor's work goes wrong. Let the contractor pull it.

Read the full Massachusetts guide
What happens if work is done without a permit?

The town can order the work stopped, opened up for inspection, corrected, or removed, and unpermitted work surfaces at sale when a buyer's attorney searches the permit history. For electrical work the state's own advice is to hire a licensed electrician to review it, pull a permit for it, and bring it up to code. It is far cheaper to permit it the first time.

Explore Massachusetts

Are you a contractor?

Homeowners in Canton ask this page for licensed heating, window, roofing and siding contractors. Get listed on masshomecomfort.com and receive those requests.

Get listed on masshomecomfort.com

Permit data for your business

Every Canton permit above, with the contractor name, valuation, house number and work description, delivered daily by permit type and niche.

See permit alert plans